Viewed products
GEB 504503
Application:
Adhesive for the assembly of flexible PVC and rigid PVC pipe elements used in the swimming pool world. - Resistant to pool water treatment products
Advantage:
Bonding in a wet environment requiring rapid drying - Supplied with a brush cap. - Rapid pressurization: up to 10 bars = 15 minutes, from 10 to 25 bars = 1 hour, over 25 bars = 24 hours.
Instructions for use :
Soft PVC/Rigid PVC (U-PVC) Bonding - Surfaces must be clean and free of grease. - Perform a dry fit test to verify depth and orientation. - Apply a thick layer of adhesive with the brush cap to the male part of the pipe and female part of the fitting. - Push the two parts together and turn 1/8 to 1/4 of a turn. - Rigid PVC/Rigid PVC (U-PVC/U-PVC) Dry fit to check depth and orientation. - Sand the surfaces to be joined with abrasive paper. - Chamfer the ends. - Clean with GEBSOPLASTstripper. - Apply the adhesive with the brush cap on both parts. - Fit immediately without turning and do not handle for 5 minutes.
Aucun avis pour le moment.
Reduced double female sleeve: 26X34/20X27
4,10 €Reduced female double sleeve Riquier. Reduced double female sleeve: 26X34/20X27 reference 4810.
Standard Teflon: 19mm x 12M x 0.075mm
4,27 €Sealing of threaded connections GEB. Standard Teflon: 19mm x 12M x 0.075mm reference 815194.
Steel clamp 24-36 mm, width 8 mm, set of 10
17,28 €Royal Collar I.N.G Fixations. Steel clamp 24-36 mm, width 8 mm, set of 10 reference A502318.