Tubular shower door side seal 1.95 m

The tubular lip seal for glass or acrylic shower doors from 5 to 8mm thick. Easy to use, simply clip or slide along the bottom of the door to the desired position.

Can be cut to desired size.

Features :

• Tubular lip seal for shower doors and bathtubenclosures in glass or acrylic 5 to 8 mm thick.
• Available in 1 m for "door bottom" use.
• Suitable for doors/walls in contact with a floor, shower tray or bathtub.

Installation:

Preparation:

• If necessary, remove old seal, remove traces of glue or silicone, clean up residues
• Measure your door size
• Transfer this to the gasket, cut the rigid part with a cutter or fine saw, and the flexible part with a chisel or cutter.

Instructions for use:

• 6 to 8mm doors: Clip or slide the gasket along the door to the desired position
• 5mm doors
• Apply translucent Silicone for all surfaces or Joint & Fix Cristal beforehand, then clip or slide the seal along the door to the desired position

Tip :

• In cold weather, to facilitate installation, we recommend bringing the sealant to room temperature at least 1 hour before fitting
• It may be easier to work on a dismantled door

Storage :

• Store at temperatures between -5°C and +40°C
• At 20°C, the product has a shelf life of 10 years

Product benefits :