Descaler for heating element 5 liters

WARNING - NON-SHIPPABLE ITEM

PRODUCT ONLY AVAILABLE FOR IN-STORE PICKUP IN MONTPELLIER

Descaler for water heaters and wall-mounted boilers

APPLICATION FIELD

Descaling of water heaters and wall-mounted boilers.

The HEATING ELEMENT DESCALER is designed for all models of descaling pumps.

USAGE

The product is concentrated: dilution from 1 to 10 depending on the scale buildup but can also be used pure. It can be used multiple times. Replace it when it loses its effectiveness.

Pour the product into the descaling pump's tank. After descaling, rinse the descaled circuit thoroughly.

The HEATING ELEMENT DESCALER can be used on stainless steel. In this case, it is recommended to use our NEUTRALIZER 11N after descaling to stop the product's effect.

If the descaling pump is worn and the circuit to be descaled is heavily clogged with scale (low flow), it is recommended to dilute the product: 1 volume of DESCALER and 9 volumes of water.

This way, there will be no appearance of a scale plug that could not be eliminated by a worn pump with low flow. With this method, descaling will take longer.

SAFETY

R34 Causes burns.

R37 Irritating to respiratory system.

S2 Keep out of reach of children.

S26 In case of contact with eyes, rinse

immediately and thoroughly with

water and consult a specialist.

S36/37/39 Wear suitable protective clothing,

gloves, and eye/face protection.

S45 In case of accident or if you feel unwell,

seek medical advice immediately (show

the label if possible).

S51 Use the product in a ventilated area.

Contains hydrochloric acid.

ENVIRONMENT

Product naturally degradable at over 95%.

Recyclable packaging.