Infrared thermometer with probe LIT11TC

INFRARED THERMOMETER LIT11TC - COP14028

The LIT11TC is a non-contact infrared thermometer equipped with a type K thermocouple. Several math modes are available for the infrared function. Allows measurement in heating, ventilation and air conditioning applications, as well as refrigeration and heating systems, return dampers, circuit breaker panels, motors and bearings, transformers and ductwork. When taking infrared measurements, the thermometer measures the temperature from -60 to 500 degrees C (-76 to 932 degrees F) with an optimal accuracy of + or - 1 degree C (+ or - 2 degrees F). Infrared sensor measures temperature remotely for applications. The detachable K-type thermocouple probe takes surface temperature measurements. The infrared sensor has a distance-to-point ratio of 11: 1, which means that the field of measurement is approximately 11 feet in diameter when the target is 1 foot away. It has an adjustable emissivity setting to improve the accuracy of measurements on various types of surfaces. A built-in laser pointer helps improve the accuracy of infrared measurements. The LCD display can show the current temperature, the high or low voltage reading, the difference between the high and low temperatures, and the average temperature. The operator can choose to display the readings in degrees Fahrenheit or Celsius. The operator can set the high and low temperature alarms to sound or exceed preset limits. The display is backlit for optimal readability in low light. The thermometer runs on two AAA batteries (included) and can be terminated after 60 seconds or 12 minutes of non-use to conserve battery life. A carrying case is included for transport and storage of the thermometer.

This unit comes with a storage bag.
Be sure to keep this instrument out of the reach of children and not to use it for safety applications.

Application
Conduits - Transformers - Motors / Bearings - Circuit breaker panels - Supply and return registers - Heating systems - Refrigeration systems.

Storage and cleaning
The sensor lens is the most delicate part of the thermometer. The lens must be kept clean at all times, care should be taken when cleaning the lens using only a soft cloth or cotton swab with water or medical alcohol. Allow the lens to dry completely before using the thermometer. Do not immerse any part of the thermometer. The thermometer should be stored at room temperature between -20°C and +65°C.