Leak detection kit for swimming pools and SPAs.

Leak detection kit for swimming pool and SPA, GEB reference 127298.

Fluorescein does not stain non-porous materials (marble, enamel/porcelain, tiles, stainless steel...). Nevertheless, in the event of staining, and on porous materials (stone, wood...) the colorant is easily removed with bleach or an alkaline detergent. Store in a dark place, between +5°C and +30°C. The expiry date on the packaging is measured on unopened product, stored at 20°C under normal humidity conditions. This kit offers a ready-to-use, easy-to-use solution. It can be used to locate leaks in parts to be sealed and in pool and spa basins, thanks to its 30 cm extension, so you don't have to dip your hands in the water. Practical in winter! The bottle holds up to 26 test doses.

Kit contents

• 80 ml bottle (fluorescein dye)
• 30 cm extension
• 20 ml syringe
• Instructions for use

Features

• Reducing nozzle for improved injection precision
• For use in pools and spas treated with chlorine, salt or bromine
• Appearance: Liquid
• Color: Orange to amber
• pH: Between 8 - 11

Instructions for use

Make sure to cut off the water flow to prevent any movement and facilitate detection.

Make sure the water level is higher than the suspected leak.

Ensure that the product is used more than 12 hours after water treatment products (chlorine, etc.).

Ensure that the pH of the water is 7 or higher.

Kit assembly: fit extension tube onto syringe tip.

Take the required amount of product directly from the bottle, using the kit.

Gently dip the extension tube into the water at the point of the suspected leak and inject the product with gentle pressure.

In the event of a leak, the fluorescent yellow dye is sucked in and locates the leak.

Wait for the dye to disappear before bathing again. In water, the dye disappears in less than an hour in daylight and sunlight. This time is extended if the product is used in a closed, unlit room.

Clean kit with water after use.