



(14.23 € HT)
Watertightness of sanitary appliances GEB. Aquatex white: water cleanable silicone, 310 ml reference 590800.
Features:Sanitary silicone emulsion sealant:
Application :
Preparation:
- Surfaces must be dry, free of dust and grease.
Instructions for use:
- For joints that are too deep, limit depth with cellular foam (closed-cell PE or open-cellPU ).
- Joint dimensions must take account of the mastic and local regulations. Generally speaking, the width is twice the thickness.
- It is advisable to limit the width by placing adhesive tape on each side of the joint, which should be removed immediately after smoothing.
- Cut the end of the nozzle to a diameter slightly smaller than that of the joint, then apply the filler.
- Smooth the joint within 10 minutes, using the joint smoother, a spatula or a damp sponge. Smoothingtime can be increased by gently spraying a little water over the joint.
- It is advisable to allow the putty to dry for several hours (3 minimum) before subjecting it to indirect water splashes (run-off) and 48 hours for direct exposure.
The mastic's mechanical and adhesion properties will gradually develop. Optimum results are obtained a few weeks after application.Consumption :
Tips :
Storage :
Remarks :
Data sheet
Specific References
No customer reviews for the moment.