Gebsicone W2 cartridge 280 ml, sand beige

Features:

Neutral silicone sealant (alcohol / alcoxy) with fungistatic effect (protection against mold) - Special sanitary quality - Usable on most substrates

• Elastic sealing joint around sanitary appliances: sinks, basins, trays and shower cabins, bathtubs, kitchen sinks, bathroom furniture, countertops, melamine furniture.
• Applicable on glass, enamel, porcelain, acrylic, synthetic materials and resin, wood, concrete, stainless steel, natural stones*, etc…. [ (*) The diversity of nature especially for marble and granite requires a prior test on a hidden part].
• The presence of effective antifungal prevents the development of those black stains that give the joint a dirty appearance.

Implementation:

Preparation:

• Surfaces must be dry, dust-free, and degreased.

Instructions for use:

• For joints that are too deep, limit the depth with a cellular foam. In general, the depth of the joint
• must be less than half its width (non-through).
• Cut the end of the nozzle to a diameter slightly smaller than that of the joint, then apply the product.
• Smooth for example using the GEB joint smoother no later than 5 minutes after application.
• Do not apply the sealant if the temperature is below +5°C or above +40°C.

Consumption:

• Depending on the dimensions of the joint and the application, a 310 ml cartridge will allow for a joint of a length (the length of the joint is expressed in meters)

Cleaning of equipment:

• Cleaning of equipment is done with acetone, white spirit, or ethyl alcohol before the sealant dries and by scraping after hardening.

Product advantages:

• Multi-purpose
• No rinsing or drying required

Tips:

• • Predefine the location of the joint by placing adhesive tape that will be removed immediately after smoothing.

Storage:

• Store at a temperature between +5°C and +25°C.
• The expiration date noted on the packaging is measured on unopened product, stored at 20°C under normal humidity conditions.

Observations:

• The sealant cannot be painted.
• For use on natural stones (marble, granite...) it is recommended to perform a prior test on a hidden part.
• Prolonged storage at a higher temperature may, in some cases, alter the final characteristics of the product.