Universal stripper and degreaser AE 400/650ml

Application:

Cleaning solvent for preparing plastic and metal surfaces before connection.

Product benefits :

Compatible with all common plastics (PVC-U, soft PVC, PVC-C and ABS) and metals (copper, cast iron, steel, galvanized steel...)
A 400mL aerosol can corresponds to approximately 180 fittings of 40mm diameter.

Technical Features :

Strips plastic fittings and degreases metal fittings, removing oil, grease and other substances that make the connection difficult
Improves the bonding of PVC adhesives by solubilizing the PVC moulding skin,
Dust the fittings,
Multi-directional use.

Instructions for use :

Before applying the stripper, strip the parts to be assembled with an abrasive cloth
Spray the UNIVERSAL STRIPPER on the part to be stripped and let the surplus of liquid flow. This surplus will carry away grease and dust.
After cleaning, use the GEBSOPLASTadhesive best suited to your work or, in the case of a threaded connection, allow the connection to dry and then make your seal.
For all other connection products, follow the instructions on the decoration and/or the manufacturer's data sheet.

Advice from the Pro:

UNIVERSAL STRIPPER is not suitable for stripping before soldering and brazing.
It should be used in a ventilated area.
The product should be stored and used away from sources of heat or voltage.